Ganz ZC-PT336N-IR User manual - page 20
Press FOCUS NEAR button when the cursor is at YES in order to clear memorized data.
Then each item such as tour, preset, and sector will flicker for about 2 ˜ 3 seconds.
After this process, the menu is returned to the previous page.
•
Use the above method for [PRESET CLEAR], [SECTOR CLEAR],[PRIVACY CLEAR],
[PATTERN CLEAR].
OSD Menu Setting
- To Clear all data and return to factory defaults, move the joystick right or press the pan light key
to when the cursor is at [LOAD OPTIMIZED DEFAULT] to enter the next page.
- Move joystick or the pan right key so that the cursor is over YES, then press the FOCUS NEAR
button.
“
ALL DATA INITIALIZING” is then displayed for about 5˜7 seconds and then the menu is
returned to the previous page automatically.
B-8. DOME SET - [NEXT PAGE] - SAVE AND EXIT
To saving the memorized data and escape this page, move joystick to the right direction when
cursor is at SAVE AND EXIT.
B-9. DOME SET - [NEXT PAGE] ‒ EXIT
In order not to save any data and wants to escape this page, move joystick to the right direction
when cursor is at EXIT.