Gardenline GLPT 2538 User Manual - page 16
AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
31
25cc Petrol Grass Trimmer – GLPT 2538
Set up
AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
30
25cc Petrol Grass Trimmer – GLPT 2538
Set up
4. Setting the cutting height
– No tools are required for this part of the assembly. Fit the carrying strap
(Fig. 8a/Item 15) to the hook on the long handle (Fig. 8b/Item 24).
– Slip the shoulder strap (Fig. 8a) from the RHS, over the left shoulder.
– Set the length of the shoulder strap in such a way that the cutting head runs
parallel to the ground.
– In order to establish the optimum length of the shoulder strap, you should
then make a few swinging movements without starting the engine (Fig. 9a).
WARNING!
Always use the strap when working with the equipment.
Attach the strap as soon as you have started the engine and it
is running in idle mode. Switch off the engine before you take
off the carrying strap.
Fig. 9a
Fig. 8a
15
Fig. 8b
24
5. Fuel and oil – Recommended fuels
Use only a mixture of unleaded petrol and special 2-stroke engine oil. Mix the fuel mixture
as indicated in the fuel mixing table.
CAUTION!
Do not use a fuel mixture which has been stored for longer
than 90 days.
CAUTION!
Never use 2-stroke oil with a recommended mixing ratio of
100:1. The manufacturer’s warranty will be voided in case of
engine damage due to inadequate lubrication.
CAUTION!
Only use containers designed and approved for the purpose
to transport and store fuel. Pour the correct quantities of
petrol and 2-stroke oil into the mixing bottle provided
(see scale printed on the bottle). Then shake the bottle well.
6. Fuel mixing table
Mixing Procedure: 40 parts petrol to 1 part 2-stroke oil.
Petrol
2-stroke oil
1 litre
25 ml
5 litres
125 ml