Gardenline GLPT 2538 User Manual - page 5
AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
9
25cc Petrol Grass Trimmer – GLPT 2538
Safety
AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
8
25cc Petrol Grass Trimmer – GLPT 2538
General information
Safety
Explanation of the symbols and types of instructions used
1
Warning!
2
Read the instructions before using for the first time!
3
Wear protective headgear, goggles and ear Defenders!
4
Wear sturdy, non-slip footwear!
5
Wear safety gloves!
6
Protect the equipment from rain and damp!
7
Be careful of objects being catapulted away!
8
Always switch off the equipment and disconnect the spark plug boot
before carrying out any maintenance work!
9
The distance between the equipment and persons in the vicinity must be
at least 15 m!
10
The cutting tool (blade/cutting line) continues to rotate after the machine
is switched off!
11
Caution: Hot equipment parts. Keep your distance!
12
Do not use any cutting tools made of metal.
DANGER!
Due to the high risk of physical injury to the user, the
equipment must not be used to carry out the following work:
to clean dirt and debris off walkways, or to chop up tree or
hedge clippings. Similarly, the equipment must not be used
to level out high areas such as molehills. For safety reasons, the
equipment is not allowed to be used as a drive unit for other tools
of any kind.
The equipment is allowed to be used only for its intended
purpose. Any other use is deemed to be a case of misuse.
The user/operator and not the manufacturer will be liable
for any damage or injuries of any kind resulting from such
misuse.
Reasonably foreseeable misuse
– Not reading the Instructions and Safety advice in this User
Guide, before using the product.
– Damage/Injury caused by not switching the engine off.
– Using too much force when bump feeding the line.
– Damage/Injury caused by the cutting line hitting stones/
foreign objects which are then catapulted away.
The reprinting or reproduction by any other means, in whole or
in part, of documentation and papers accompanying products
is permitted only with the express consent of Einhell UK Ltd.
Subject to technical changes.
Fig. 14
1
8
9
10
11
12
2
3
4
5
6
7