Gardenline GLPT 2538 User Manual - page 23
AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
45
25cc Petrol Grass Trimmer – GLPT 2538
Maintenance and servicing
AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
44
25cc Petrol Grass Trimmer – GLPT 2538
Maintenance and servicing
Maintenance of the air filter
Soiled air filters reduce the engine output by supplying too little air to the carburettor.
Regular checks are therefore essential. The air filter (22) should be checked after every
25 hours of use and cleaned if necessary. If the air contains a lot of dust, the air filter
should be checked more frequently.
1. Remove the cover from the air filter housing (Fig. 10a/Item 8).
2. Remove the air filter (Fig. 10b & 10c/Item 22).
3. Clean the air filter by tapping it or blowing it out (with compressed air).
4. Assemble in reverse order.
NOTICE!
Never clean the air filter with petrol or inflammable solvents.
Maintenance of the spark plug
Electrode gap = 0.6 mm (distance between the electrodes and between which the
ignition spark is created). You will need a metric feeler gauge set to measure the gap,
the supplied combined spark plug wrench/ screwdriver and a torque wrench. Tighten the
spark plug to 12 to 15 Nm using a torque wrench (available from your dealer). Check the
spark plug for dirt and grime after 10 hours of operation and if necessary clean it with a
copper wire brush. Thereafter service the spark plug after every 50 hours of operation.
1. Pull off the spark plug boot (Fig. 11a/Item 23).
2. Remove the spark plug (Fig. 11b) with the supplied spark plug wrench (19).
3. Clean the spark plug and reset the gap.
4. Assemble in reverse order.
Fig. 10c
22
Fig. 10a
8
Fig. 10b
22
8
Fig. 11a
3
Fig. 11b