Gardenline GLPT 2538 User Manual - page 20
AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
39
25cc Petrol Grass Trimmer – GLPT 2538
Use
AFTER SALES SUPPORT
0151 649 1500
1890 946244
www.einhell.co.uk
38
25cc Petrol Grass Trimmer – GLPT 2538
Use
Extending the cutting line
Cutting down to the ground (Mowing)
When cutting down to the ground you will cut all the vegetation. To do this, set the line
spool at an angle of 30° to the right. Place the handle in the required position (Fig. 9e).
CAUTION!
Increased risk of injury to the user, bystanders and animals,
and increased risk of damaging property due to objects
(e.g. stones) being catapulted away.
CAUTION!
Do not use the equipment to remove objects from footpaths,
etc. The 2 in 1 Petrol Grass Trimmer/Brush Cutter is a powerful
tool and can catapult small stones and other objects a
distance of 15 metres or more, causing injuries and damage
to cars, houses and windows.
Sawing
The equipment is not suitable for sawing.
Fig. 9e
Malfunction and remedy (FAQ)
The motor
does not start
Correct starting procedure
not followed
Follow the instructions
for starting
Sooted or damp spark plug
Clean the spark plug or
replace it with a new one
Incorrect carburettor setting
Contact either an authorized
customer service outlet or the
After Sales support details at
the bottom of the page
The equipment
starts but does
not develop
its full power
Incorrect choke lever setting
(See page 35)
Set the choke lever to ' '
Soiled air filter (See page 44)
Clean the air filter
Incorrect carburettor setting
Contact either an authorized
customer service outlet or the
After Sales support details at
the bottom of the page
The engine
does not run
smoothly
Incorrect electrode gap
on the spark plug
Clean the spark plug and
adjust the electrode gap or
fit a new spark plug
Incorrect carburettor setting
Contact either an authorized
customer service outlet or the
After Sales support details at
the bottom of the page
Engine smokes
excessively
Incorrect fuel mix
Use the correct fuel mix
(see fuel mixing table)
Incorrect carburettor setting
Contact either an authorized
customer service outlet or the
After Sales support details at
the bottom of the page