Garmin GNC 420AW Installation Manual - page 3
400W Series Installation Manual
Page A
190-00356-02
Rev.
F
© Copyright 2006-2008
Garmin Ltd. or its subsidiaries
All Rights Reserved
Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted,
disseminated, downloaded or stored in any storage medium, for any purpose without the express prior
written consent of Garmin. Garmin
hereby grants permission to download a single copy of this manual
and of any revision to this manual onto a hard drive or other electronic storage medium to be viewed and
to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of
this manual or revision must contain the complete text of this copyright notice and provided further that
any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.
Garmin International, Inc.
1200 E. 151
st
Street
Olathe, KS 66062 USA
Telephone: 913-397-8200
Aviation Panel-Mount Technical Support Line (Toll Free): 1-888-606-5482
Web Site Address: www.garmin.com
Garmin (Europe) Ltd.
Liberty House
Bull Copse Road
Hounsdown Business Park
Southampton, SO40 9RB, UK
Telephone: 44 (0) 8708501243
RECORD OF REVISIONS
Revision
Revision
Date
Description
A 11/2/06
Production
Release
B
11/28/06 Added GA 35 antenna information and corrected wire gauge for
main connector power.
C
4/5/07
Incorporated customer feedback.
D
10/1/07
Incorporated main software version 3.00 and GPS/WAAS
software version 3.0. Added GA 36, GA 37 and several other
non-Garmin antennas. Changed GPS antenna cable loss
requirements. Added interface interconnects to equipment,
including several autopilots, Century AK 1081 GPSS converter,
ACK Technologies altitude encoder and Avidyne PFD/MFD.
Added GPS vertical guidance display for EFIS 40/50. Added
COM remote discrete.
E
3/25/08
Incorporated main software version 3.10 changes. Added ETSO
authorizations, ETSO deviations, and FCC ID information.
Added interface interconnects to Cessna IFCS and Bendix M4
autopilots, and Collins DME 42. Clarified requirements for
approving interfaces to autopilot, audio panel, air data
computers and altitude encoders/serializers.
F
10/7/08
Addition of GAD 42, G600, and v3.10 changes