Garmin GPSMAP 5008 - Marine GPS Receiver Quick Reference Manual - page 2
To turn on the chartplotter:
1. Pressandreleasethe
Power
key.
2. Whenthewarningscreenappears,touch
I Agree
.
Turning the Unit On and Off
Creating and Editing Routes
June 2010
Part Number 190-00803-01 Rev. D
Printed in Taiwan
To turn off the chartplotter:
1. Pressandholdthe
Power
key.
2. Ifonechartplotterisconnected,thechartplottershutsdown.Ifmultiplechartplottersare
connected, a prompt asks if you want to turn off the entire system. Touch
Yes
toturnoffthe
entire network, or touch
No
toputthechartplotterinsleepmode.
Adjusting the Backlight and Color Mode
To adjust the backlight level:
1. While the chartplotter is on, press and quickly release the
Power
key.
2. Touch
Backlight
.
3. Select an option to adjust the backlight:
To allow the chartplotter to automatically adjust the backlight based on ambient light, touch
Auto
.
To manually adjust the backlight, touch and hold
Up
or
Down
,ortouchanddragthe
brightnessbar.
•
•
To adjust the color mode:
1. Pressandreleasethe
Power
key.
2. Touch
Color Mode
.
3. Touch
Day Colors
,
Night Colors
,or
Auto
.
Using Combination Screens
To access and change screen combinations:
1. Complete one of the following actions to access the Edit Combinations screen:
Whileviewingacombinationsscreen,touch
Menu
>
Change Combination
.
FromtheHomescreen,touch
Combinations
>
Unused Combo
(if one is available).
2. SelectanoptiontocustomizetheCombinationsscreen.IfyouhaveaBlueChart®
g2Vision
®
SD card or are connected to network devices such as sonar and radar, more
combinationscreenoptionswillbeavailable.
Touch
Functions
toselectthenumberofcombinationscreens.
Touch
Layout
tochangetoverticalorhorizontallayout.
Touch
XM Bar
totoggletheXM
®
baronoroff.
Touch
Data Bar
totoggle
thedatabaronoroff.
Touchanumberedoption,
suchas
1. Nav Chart
or
2. Perspective 3D
inthe
example,toselectthe
combinationscreento
view.
•
•
•
•
•
•
•
Combination
screen 1
Combination
screen 2
Data bar
XM bar
Combination
screen 1
Combination
screen 2
Data bar
XM bar
To create a route from your present location:
1. FromtheHomescreen,touch
Charts
>
Navigation Chart
.
2. TouchyourdestinationontheNavigationchart.TouchanddragtheNavigationscreentopan
themap.Thedestinationisindicatedby .
3. Touch
Navigate To
>
Route To
.
4. Touch the location at which you want to make the last
turntowardyourdestination.
5. Touch
Add Turn
.
6. Toaddadditionalturns,continuetotouchthelocation
at which you want to make a turn (working backward
from the destination), and then touch
Add Turn
.
7. Touch
Done
to finish the route, or touch
Cancel Route
todeletetheroute.
To create a route in another location:
1. FromtheHomescreen,touch
Information
>
User
Data
>
Routes
>
New Route
>
Use Chart
.
2. Touchtheroutestartingpoint.Thestartingpointis
indicatedby .
3. Touch
Add Turn
.
4. Touch the location of the first turn.
5. Touch
Add Turn
.Repeatuntiltherouteiscomplete.
To edit a route:
1. FromtheHomescreen,touch
Information
>
User Data
>
Routes
.
2. Touchtheroutetoedit.
3. Touch
Review
>
Edit Route
.Youcanedittheroutenameorturns,ordeletetheroute.
Using the Man OverBoard Feature
To mark and navigate to a Man Overboard (MOB) location:
1. FromtheHomescreen,touch
Man Overboard.
2. Touch
Yes
tobeginnavigatingtotheMOBlocation.
To delete an MOB location:
1. FromtheHomescreen,touch
Information
>
User Data
>
Waypoints
.
2. TouchtheMOBlocationyouwanttodelete.
MOB locations are marked with the symbol.
3. Touch
Review
>
Delete
.
Man Overboard
Go to www.garmin.com for additional documentation and information.
Brightness bar
See the Important Safety and Product Information guide in the product box for product
warnings and other important information.
© 2010 Garmin Ltd. or its subsidiaries
Garmin
®
, the Gamin logo, GPSMAP
®
, BlueChart
®
, and g2 Vision
®
are trademarks of Garmin Ltd. or its subsidiaries,
registered in the USA and other countries. These trademarks may not be used without the express permission of Garmin.
XM
®
is a registered trademark of XM Satellite Radio Inc.