Garmin GTN 6 series Maintenance Manual - page 21

190-01007-B1

GTN 6XX/7XX Part 27 AML STC Maintenance Manual

Rev. 1

Page 3-3

6. Click Next and the window shown in 

Figure 3-5 will appear.

CAUTION

In order to create a GTN Software Loader 

Card, the drive that you select will be 

completely erased.

7. Ensure that the correct drive is selected. Click 

Next to create the card. Click Next to 

acknowledge any warnings that appear. The 

progress window in Figure 3-6 will appear 

when the card is being created.

8. After the card has been created, the window 

shown in Figure 3-7 will appear. Click Finish 

to complete the update process.

9. Eject the card from the card reader (or stop 

the card reader in Windows). The GTN 

Software Loader Card is now ready to use.

Figure 3-5. GTN Software Loader Card 

Formatting

Figure 3-6. Update Progress Window

Figure 3-7. Update Completion