Garmin GTN 6 series Maintenance Manual - page 26
GTN 6XX/7XX Part 27 AML STC Maintenance Manual
190-01007-B1
Page 3-8
Rev. 1
Lighting
This page allows the user to set the display parameters that affect the backlight and key lighting brightness.
Enhanced Lighting
This page replaces the 'Lighting' page when enabled under the 'Main System' configuration page.
Enhanced Lighting allows the user to set the display parameters that affect the backlight and key lighting
brightness. Enhanced lighting may be used to configure separate Day/Night lighting curves.
Audio
This page allows the user to configure the aural alert volume.
Traffic
This page allows the user to configure the traffic intruder symbol color and configure whether or not the
GTN is the display used to control the traffic system.
Main System
This page allows the user to display miscellaneous configuration options for the GTN. Air/Ground
Threshold, Air/Ground Discrete, Fuel Type, and Heading/Altitude input source connection statuses are
settings on this page.
COM
This page allows the user to configure the RF squelch volume, microphone 1 gain, and sidetone volume.
These selections are only available for the GTN 635, 650, and 750 units.
VOR/LOC/GS
This page allows the user to verify the CDI outputs from the VOR/LOC/GS receiver as well as the OBS
resolver input to the VOR receiver. This selection is only available for the GTN 650 and 750 navigation
units.
Discretes
This page allows the user to customize the configuration of some discrete inputs/outputs on the J1001 and
J1002 connectors.
Waypoints
This page provides the option to allow Mark On Target (MOT) waypoint filtering in Normal mode.