Garmin GTN 6 series Maintenance Manual - page 94
GTN 6XX/7XX Part 27 AML STC Maintenance Manual
190-01007-B1
Page A-16
Rev. 1
Aircraft Wiring Diagrams
Attach the aircraft wiring diagrams showing the equipment installed by this STC or a markup of the interconnect
diagrams from the STC installation manual detailing which equipment was installed and how it was connected.
GTN Interfaced Equipment List
The purpose of the GTN Interfaced Equipment List is to document the equipment that is interfaced to the GTN(s). Use
the following guidance when filling out these tables:
Installed?: Check “Yes” if the equipment is installed in the aircraft and interfaced to the GTN. If the equipment
is not installed in the aircraft, check “No.” If the equipment is installed in the aircraft but not interfaced to the
GTN, check “No.”
GTN Interface: Check which GTN the equipment is interfaced.
Location: Enter the location of the equipment.
Notes: Add any additional information.
Equipment Type
GAD 42
Installed:
Yes
No
GTN Interface:
GTN #1
GTN #2
Location (Flight Station, Lateral Arm):
Notes:
GARMIN AUDIO PANEL
Installed:
Yes
No
GTN Interface:
GTN #1
GTN #2
Location (Flight Station, Lateral Arm):
Notes: