Garmin GTN 6 series Maintenance Manual - page 63
Manual is about: Part 23 AML STC
of
106
190-01007-B1
GTN 6XX/7XX Part 27 AML STC Maintenance Manual
Rev. 1
Page 5-15
Fan Wiring Harness Replacement
1. Strip 0.17” of insulation from each wire prior to crimping. Crimp socket contacts onto each wire of
the three-conductor wire harness. Insert newly crimped socket contacts and wires into the
appropriate connector housing location as shown in Figure 5-6.
2. Plug the three-conductor wire harness connector into the connector on the fan.
Figure 5-6. Fan Wiring Installation
0$;
$5
127(6
:5$3)$1:,5(6),7+)86,217$3(6(3$5$7(/<)5207+(0$,1+$51(66