I-Sotec i-soamp-2 Manual - page 11
–
11
–
In this connection option, the selector switch for
the
i-soamp-2
is set to the „sub“ position. In
this switch position the active fi lters required for
the bass loudspeaker are automatically activated.
Setting
i-soamp-2
The
i-soamp-2
and/or
i-soamp-4
have a max.
current requirement of 15A per amplifi er. In a
few vehicles and when connecting to two
amplifi ers, the radio wiring cannot cover this
power requirement.
The
i-soamp-2
and/or
i-soamp-2
must then
be connected directly to the battery. (See
Chapter 1.7)
Loudspeaker wiring diagram „Four Loudspeakers
+ Subwoofer“
Wiring diagram for
i-soamp-2
for the subwoof-
er: as described in Chapter 1.4 / „Loudspeaker
wiring diagram subwoofer.“
Wiring diagram
i-soamp-4
for the front and
rear loudspeakers: as described in Chapter 1.2 of
the instructions for
i-soamp-4
. Instead of the
car radio ISO loudspeaker receptacle, however,
now the free ISO loudspeaker receptacle of the
split-adaptor AD-0124 is to be used to connect
the cable harness of the
i-soamp-2
to the car
radio (Chapter 1.2, point 1).
SUB
Normal
2 CH
-2
Made in Germany
2 CH + SUB
(extern)