I-Sotec i-soamp-2 Manual - page 6
–
6
–
1.2 Overview: the i-soamp-2 connection
principle
This depiction is designed to give you an overview
of how the
i-soamp
is connected to your vehicle‘s
components in principle.
The following steps are required to connect the
i-soamp-2
to your existing car radio:
1. Connect the i-soamp cable harness to the
compact plug on the
i-soamp-2
.
2. Connect the power plug on the
i-soamp
cable harness to the power receptacle of the
supplied power adaptor
3. Remove the ISO loudspeaker receptacle of
the vehicle‘s cable harness from the car radio
and connect it to the ISO loudspeaker
coupling (brown) of the
i-soamp
cable
harness. (For details on connection variants
see Chapter 1.3 and 1.4)
4. Remove the vehicle cable harness ISO power
coupling from the car radio and connect it to
the ISO power coupling (black) of the supplied
power adaptor (For details on the power
connection see Chapter 1.6 and 1.7)
5. Connect the ISO power plug (black) of the
supplied power adaptor to the ISO power
receptacle of the car radio
6. Connect the ISO loudspeaker plug (brown) of
the
i-soamp
cable harness to the ISO
loudspeaker receptacle of the car radio.
In any case, be sure to read the following chapter
before you start connecting the
i-soamp-2
to
fi nd out about the details of the individual
connection options.