I-Sotec i-soamp-2 Manual - page 8
–
8
–
1.4 Loudspeaker connection option „Front +
Subwoofer
For this connection
option, the front
loudspeakers and the
rear loudspeakers are
driven by an
i-soamp-2
.
The bass speaker is
driven by an
i-soamp-2
.
Signal distribution for
the amplifi ers is
performed with a split-
adaptor (AD-0124).
Use only original i-sotec subwoofers! Other
loudspeakers can damage the i-soamp-2!
Due to the increased power requirements of
these two amplifi ers it is important to connect
the amplifi ers directly to the battery. For further
information, see Chapter 1.7.
For this connection option, the
i-soamp-2
selec-
tor switch is set to the „2CH+Sub“ position. In
this switch position the active fi lters required for
the front and rear loudspeakers are automati-
cally activated.
Setting
i-soamp-2
for front loudspeakers
In this connection option, the
i-soamp-2
selector switch is set to the „Sub“ position. In
this switch position the active fi lters required for
the bass speaker are automatically activated.
(Wiring diagram see Normal + Sub)
Setting
i-soamp-2
for subwoofer
SUB
Normal
2 CH
-2
Made in Germany
2 CH + SUB
(extern)
SUB
Normal
2 CH
-2
Made in Germany
2 CH + SUB
(extern)