I-Sotec i-soamp-2 Manual - page 3
–
3
–
INTENDED USE:
The
i-soamp-2
is exclusively intended for
operation in a car with a 12 V vehicle electrical
system and on the original loudspeaker cable
harness. It takes the audio signals of the OEM
radio and conducts them to the vehicle loud-
speakers in amplifi ed form.
INSTALLATION
When installing the equipment, be sure that it is
well ventilated. It must not be covered or
mounted near other heat emitting objects or be
subjected to direct sunlight!
The
i-soamp-2
can heat itself up signifi cantly
(up to 80°C); it is therefore important to ensure
suffi cient clearance from other heat-sensitive
vehicle components (particularly plastic parts and
electronic components)!
For safety reasons, the device must be securely
mounted in the vehicle. Attach the device with
the supplied mounting screws to a fi rm and
suitable base. Do not drill holes in parts of the
vehicle if you are not sure what is located behind
it. Watch out for wiring harnesses and fuel lines!
1. Connections
The
i-soamp-2
is connected directly to the
vehicle cable harness and to the original radio
with an adaptor. Vehicle models without an ISO
connection require a special vehicle-specifi c
adaptor for this purpose. Please consult the
i-sotec
vehicle list to check whether you need
an additional adaptor to connect the i-soamp to
your vehicle.
You can do this online as well at:
http://www.i-sotec.com/de/products/chooser.php.