Installation instructions cutter kit for the easycoder® pd41 and pd42 printers.
Ii easycoder pd41/pd42 cutter kit installation instructions intermec technologies corporation worldwide headquarters 6001 36th ave. W. Everett, wa 98203 u.S.A. Www.Intermec.Com the information contained herein is provided solely for the purpose of allowing customers to operate and service intermec-m...
Two screws two cable clips cutter cover cutter spring two screws (for plastic) cutter mechanism easycoder pd41/pd42 cutter kit installation instructions installing the cutter 1 unpack your cutter kit and check that all parts depicted below are included. If not, contact your intermec sales representa...
4 easycoder pd41/pd42 cutter kit installation instructions 3 open the side door and remove the tear bar, held by two phillips screws. 4 attach the cutter mechanism to the printer using the two phillips screws included in the kit..
Easycoder pd41/pd42 cutter kit installation instructions cable clips cutter cable cutter connector 5 plug the cutter cable into the connector in the center section as shown. Secure the cable to the bottom plate using the two cable clips included in the kit. 6 use the two plastic screws to attach the...
Easycoder pd41/pd42 cutter kit installation instructions activating the cutter (pd42 only) if you are using a pd42 printer you can activate the cutter directly from the display. To activate the cutter on a pd42 printer 1 turn the printer on. 2 press setup ( ). 3 navigate to configuration > cutter > ...
Easycoder pd41/pd42 cutter kit installation instructions installing media to install media in the printer, follow the instructions provided in the printer’s user’s guide. The cutter is primarily intended to cut paper-based media in the form of continuous stock. To obtain optimal use of the cutter, m...
Intermec technologies corporation worldwide headquarters 6001 36th avenue west everett, wa 98203 u.S.A. Tel 425.348.2600 fax 425.355.9551 www.Intermec.Com p/n 1-960657-01 easycoder pd41/pd42 cutter kit installation instructions *1-960657-01*.
