Summary of wsd18-060
Page 4
1 wsd18 instructions for use 1. Safety information .........................................................2 1.1 warning ................................................................2 1.2 precautions ...........................................................2 2. Preparing the coffee machine ......
Page 5
2 18. De‐scaling ..................................................................19 19. Tips for perfect coffee ...............................................20 20. Messages ...................................................................21 21. Problems............................................
Page 6
3 machine. ⑸ when disconnecting the mains cable never pull on the mains cable or the machine itself. ⑹ never repair or open the coffee machine yourself. Any repairs may only be carried out by authorized service shops using original spare parts and accessories. ⑺ the coffee machine is connected to ma...
Page 7
4 we recommend: z a fine grinding degree _ for bright roasts (the smaller the dots, the finer the grinding) z a coarse degree _ for dark roasts (the larger the dots, the coarser the grinding) the grinding degree may only be adjusted while the grinding gear is running. ⑴ open the bean tank cover (1...
Page 8
5 level 1 water hardness degree 1 level 2 water hardness degree 2 level 3 water hardness degree 3 level 4 water hardness degree 4 ¾ when the coffee machine leaves the factory it is adjusted to level 3. You can adjust another hardness. To do this, proceed as follows: ⑴ display: ready ⑵ press the prog...
Page 9
6 ⑼ open the steam / hot water draw‐off tap (14) (fig.13). Display: rinsing filter close tap ⑽ close the steam/hot water draw‐off tap (14), now the coffee machine will heat up to coffee temperature. Display: heating press rinse rinsing ready ¾ now you have activated the filter. In programming mode t...
Page 10
7 rinse ⑵ press the maintenance key (7), the maintenance led(24) is active. Display: rinsing ready 7. Adjusting the water quantity for coffee ¾ the indicated value in ml is a reference value and may deviate from the actual value. ¾ if you press the draw‐off key for 2 cups (6) the water quantity is d...
Page 11
8 value (ml) refers to 1 cup. ⑴ display: ready ⑵ press the draw‐off key for 2 cups (6). Display: 2 cups 120 ml (water quantity last adjusted) the illuminated ring (2) is active. ⑶ turn the rotary switch (1) again to select the water quantity individually: for example: 210 ml 2 cups ⑷ your product is...
Page 12
9 do not replace the replaceable hot water nozzle(16)(see fig. 5 )directly after drawing off water, because the nozzle is hot after the draw‐off operation. ¾ at the start of the water draw‐off operation there can be splashing avoid direct contact with the skin! ⑴ display: ready ⑵ place a cup under...
Page 13
10 ⑸ if you do not change the steam draw‐off time settings using the rotary switch (1), the machine will use the settings last adjusted. ⑹ during the steam draw‐off operation, the message steam is displayed ⑺ when the steam quantity is reached, the message close tap is displayed ⑻ close the steam / ...
Page 14
11 your choice. 13.3 cleaning the professional‐cappuccino frother the professional‐cappuccino frother must be cleaned after each draw‐off operation. ⑴ fill water in a container and immerse the hose in it. ⑵ draw off steam until the water/steam mixture is clean. ⑶ if necessary, disassemble the prof...
Page 15
12 15.2 programming the water hardness refer to chapter 4 “adjusting the water hardness”. 15.3 programming the aroma intensive or standard ¾ when the machine leaves the factory, the aroma is set to intensive. If requested it can also be set to standard. ⑴ display: ready ⑵ press programming key (4) u...
Page 16
13 display: time ⑷ now press the rotary switch (1) to start programming the time. Display: ‐‐:‐‐ ⑸ turn the rotary switch (1) to adjust the hours.. Display: 12:‐‐ ⑹ press the rotary switch (1) to confirm the hour settings and to activate the minutes. Display: 12:‐‐ ⑺ turn the rotary switch (1) to se...
Page 17
14 active. ⑶ turn the rotary switch (1) until unit off is displayed. Display: unit off ⑸ now press the rotary switch (1) to start programming the switch‐on time. Display: ‐‐:‐‐ ⑹ turn the rotary switch (1) to adjust the hours. Display: 12:‐‐ ⑺ press the rotary switch (1) to confirm the hour settings...
Page 18
15 below instructions to choose the language you want. ⑴ display: ready ⑵ press programming key (4) until filter appears. The program led(23) and the illuminated ring (2) is active. ⑶ turn the rotary switch (1) until language appears. ⑷ now press the rotary switch (1) to start programming the item l...
Page 19
16 display: display ⑻ press the programming key (4) to quit the programming mode or select the next programming item using the rotary switch (1). Display: ready 16. Maintenance 16.1 filling in water ⑴ display: fill water ¾ if this information is displayed, drawing off products is no longer possible....
Page 20
17 filter will appear on the display. Refer to chapter 5.2 «replacing the filter». 16.6 cleaning the coffee machine after 200 draw‐off operations or after 160 rinsing operations, the coffee machine must be cleaned. A message appears on the display, telling you to start the cleaning programme. You ca...
Page 21
18 close tap ⑶ the coffee machine is switched off. 17. Cleaning your coffee machine features an integrated cleaning program. The cleaning operation will take some 15 min. cleaning tablets which are specially designed for the cleaning programme of your coffee machine are available at your authorize...
Page 22
19 was completed successfully. 18. De‐scaling your coffee machine features an integrated de‐scaling program. The de‐scaling operation will take some 60 min. ¾ de‐scaling tablets which are specially designed for the de‐scaling program of your coffee machine are available at your authorized dealer. Pl...
Page 23
20 ⑾ empty the tray display: missing tray ⑿ insert the tray again. Display: fill water ¾ rinse the water tank thoroughly and fill it with cold, fresh tap water. ⒀ display: open tap ⒁ open the steam / hot water draw‐off valve (14) (fig. 13). Display: decalc.On close tap ⒂ close the steam / hot water ...
Page 24
21 20. Messages display cause remedy fill water 1. Water tank is empty 2. Float defective 1. Refill water 2. Rinse or de‐scale water tank fill beans 1. Bean tank is empty 2. Although you have refilled beans ,the message still appears 1. Refill beans 2. Draw off a cup of coffee. The message will disa...
Page 25
22 21. Problems problem cause remedy very loud noise coming from the grinding gear foreign body in grinding gear 1. Drawing off pre‐ground coffee still possible 2. Have coffee machine checked by service too little froth when frothing milk 1. 2‐stage frothing jet blocked 2. 2‐stage frothing jet in wr...
Page 26
23 23. Technical data technical data voltage 230 vac / 120 vac power 1400 w fuse 10 a / 15 a energy consumption standby approx. 0.5 wh energy consumption «ready for draw‐off» mode approx. 12.0 wh pump pressure static, max. 15 bar water tank 1.9 litres bean tank capacity 200gr. Coffee grounds contain...