Java wsd18-060 Operating Instructions Manual - page 16
13
DISPLAY: TIME
⑷ Now press the Rotary Switch (1) to start programming
the time.
DISPLAY: ‐‐:‐‐
⑸ Turn the Rotary Switch (1) to adjust the hours..
DISPLAY: 12:‐‐
⑹ Press the Rotary Switch (1) to confirm the hour settings
and to activate the minutes.
DISPLAY: 12:‐‐
⑺ Turn the Rotary Switch (1) to select the minutes.
DISPLAY: 4:05
⑻ To confirm the new settings, press the Rotary Switch (1).
DISPLAY: TIME
⑼ Press the programming key (4) to quit the
programming mode or select the next programming
item using the Rotary Switch (1).
DISPLAY: READY
If the machine is disconnected from power supply, the
time must be programmed again.
15.6 Programming the automatic switch‐on time
¾ You must programme the time (Chapter 15.5) if you
want to use the automatic switch‐on function.
⑴ DISPLAY: READY
⑵ Press programming key (4) until FILTER appears.
The program LED(23) and the illuminated ring (2) is
active.
⑶ Turn the Rotary Switch (1) until MACHINE ON is
displayed.
DISPLAY: UNIT ON
⑷ Now press the Rotary Switch (1) to start programming
the switch‐on time.
DISPLAY: ‐‐:‐‐
⑸ Turn the Rotary Switch (1) to adjust the hours.
DISPLAY: 12:‐‐
⑹ Press the Rotary Switch (1) to confirm the hour settings
and to activate the minutes.
DISPLAY: 12:‐‐
⑺ Turn the Rotary Switch (1) to select the minutes.
DISPLAY: 12:45
⑻ To confirm the new switch‐on time, press the Rotary
Switch (1).
DISPLAY: UNIT ON
⑼ Press the programming key (4) to quit the
programming mode or select the next programming
item using the Rotary Switch (1).
DISPLAY: READY
15.7 Programming the automatic switch‐off time
¾ You must programme the time (Chapter 15.5) if you
want to use the automatic switch‐off function.
⑴ DISPLAY: READY
⑵ Press programming key (4) until FILTER appears.
The program LED(23) and the illuminated ring (2) is