Java wsd18-060 Operating Instructions Manual - page 7
4
We Recommend:
z A fine grinding degree _ for bright roasts (the smaller
the dots, the finer the grinding)
z A coarse degree _ for dark roasts (the larger the dots,
the coarser the grinding)
The grinding degree may only be adjusted while the
grinding gear is running.
⑴ Open the bean tank cover (12) and remove the aroma
preservation cover (13).
⑵ To adjust the grinding degree, turn the Rotary Switch
(Fig. 2) to the required position.
2.6 Power switch
Actuate the power switch (21) on your coffee machine
before using the machine for the first time.
We recommend that you switch off your coffee
machine with the power switch (21) if you intend not to
use the machine for longer periods of time (e.g. during
holidays)
3. First use
⑴ Fill coffee beans in the bean tank (12).
⑵ Switch on the coffee machine using the ON/OFF key
(3). The power LED(22) and the illuminated ring (2) is
active.
⑶ Confirm your selection by pressing the Rotary Switch (1).
DISPLAY: FILL
WATER
⑷ Fill the water tank (10) with fresh water.
DISPLAY: OPEN TAP
⑸ Place an empty cup under the replaceable hot water
nozzle (16).
⑹ Open the steam / hot water draw‐off tap (14) (Fig. 13).
DISPLAY: FILLING
SYSTEM
DISPLAY: CLOSE TAP
⑺ Close the steam / hot water draw‐off tap (14).
DISPLAY: FILLING
SYSTEM
HEATING
4. Adjusting the water hardness
¾ Water is heated in the Coffee Machine. As a result,
calcification occurs during normal use and is indicated
automatically. Before using the Coffee Machine for
the first time the hardness of the water used must be
adjusted. Use the supplied test sticks for this.
¾ If the filter is activated, the program step Water
Hardness no longer appears.
¾ The COFFEE MACHINE has 5 hardness degrees which
can be used and are displayed while you are adjusting
the water hardness.
The displayed information means the following:
LEVEL –– Water hardness function closedown