Java wsd18-060 Operating Instructions Manual - page 13
10
⑸ If you do not change the steam draw‐off time settings
using the Rotary Switch (1), the machine will use the
settings last adjusted.
⑹ During the steam draw‐off operation, the message
STEAM is displayed
⑺ When the steam quantity is reached, the message
CLOSE TAP is displayed
⑻ Close the steam / hot water draw‐off tap (14).
DISPLAY: READY / STEAM READY
¾ As long as STEAM READY is on view in the display, the
machine is ready to dispense steam.
13. Drawing off steam with the Professional‐Cappuccino
Frother (optional)
¾ The Professional‐Cappuccino Frother is optionally
available. Contact your authorized dealer.
13.1 Connecting the Professional‐Cappuccino Frother to
the Coffee Machine.
⑴ Disassemble the replaceable hot water nozzle (Fig. 5) or
the replaceable 2‐stage frothing jet (Fig. 6).
⑵ Mount the Professional‐Cappuccino Frother (Fig. 7)
⑶ Press one side of the hose into the opening behind the
dial (Fig. 10)
¾ The optionally available milk container can be used for
sucking in milk.
13.2 Drawing off cappuccino and hot milk with
Professional‐Cappuccino Frother
⑴ Fill the milk container with milk or immerse the hose in
the milk directly.
⑵ Place a cup under the Professional‐Cappuccino Frother
(Fig. 8)
⑶ Press the steam pre‐selection key (8).
DISPLAY: HEATING
STEAM
READY
⑷ To draw off steam open the steam/hot water draw‐off
tap (14)(Fig. 13).
The illuminated ring (2) is active.
⑸ You can adjust the steam draw‐off time individually by
turning the Rotary Switch (1) until the required SEC are
displayed.
For example, 35 SEC
⑹ If you do not change the steam draw‐off time settings
using the Rotary Switch (1), the machine will use the
settings last adjusted.
⑺ For cappuccino turn the selector switch (1) (Fig. 9) to
area (2).
⑻ For hot milk turn the selector switch (1) (Fig. 9) to area
(3).
⑼ Now place the cup with the cappuccino froth or the hot
milk under the coffee spout and draw off the product of