Kalerm KLM1602 Operation manual - page 13
10
Program setting
This chapter will give instructions on program setting.
Ensure the coffee machine shows “READY”, press the setting
button, than press left and right button to select “MENU”,
than you can set the menu.
Maintenance setting
Please read the detailed instructions about rinsing the brewing unit and
decalcifying on P12 and P13.
Beverage setting
This chapter will instruct you how to set beverages. The setting parameters
include coffee taste strength, amount of coffee, amount of hot water and
steam time.
The parameters accomplished by beverage setting will be the default
values for each beverage.
1. Cappuccino setting
2. Coffee Latte setting
3. Coffee setting
4. Steam setting
Setting up beverage parameters and range
Drinks
Coffee volume: 25 - 240ML
Coffee volume: 25 - 240ML
Steam time: 3 - 120S
Cream time: 3 - 120S
Coffee volume: 25 - 240ML
Cream time: 3 - 120S
Strength
Volume
The parameters as strength and volume can be set for the beverages
bellow.
Please read the following table for the detail setting parameters and
adjustment range
The strength, volume and cream making time of Cappuccino can be set
The strength, volume and cream making time of Coffee Latte can be set
The strength and volume of Coffee can be set
Steam making time can be set
Temperature setting
You can set the temperature of coffee baverage.
Enter program setting menu, choose “TEMPERATURE”, press left or right
button to choose your coffee temperature. Press setting button to confirm,
setting is completed. There is high temperature and normal temperature for
choosing.
Prewbrew setting
Prebrew can be set when making coffee.
Enter into setting, choose “PRE-BREW”, press left or right button to choose if
need prebrew precooking, press setting button to confirm, setting is
completed.
coffee
coffee latte
cappuccino
steam
Mild:
Normal:
Strong:
SETTING