Kalerm KLM1602 Operation manual - page 4
01
Safety Instructions
Precautions
Please see specification label on the bottom of coffee machine or specification
parameters indicated in instruction manual(P19).
Please do not contact with heat parts of coffee machine to avoid scalding.
To avoid operator’s injury caused by burn, electric shock or other unexpect-
ed reasons, please do not contact the power cord, plug, and main body
with water.
Unplug from outlet when stop using and before cleaning. Allow to cool
before disassembling and cleaning the coffee machine.
Use of parts that are not explicitly recommended would result in a fire of
coffee machine, electric shock, or injury to persons.
Please do not use the machine outdoor.
Please do not hang up the power cord to the edges of the table, for it might
be abased to an electric leakage, and cause injury to operators.
Please place the machine in a fixed and stable workbench, and keep far
away from high temperature (e.g. gas stoves, electric cookers, induction
cookers, etc).
Power off the machine, until the cleaning program finished and no
indication on screen, and then unplug the power.
When using Espresso, Americano and Hot water, liquid in high temperature
will flow from coffee spout and hot water spout. Please do not touch it to
avoid scalding.
This appliance can be used by children aged from
8 years and above if they have been given
supervision or instruction concerning use of the
appliance in a safe way and if they understand the
hazards involved. Cleaning and user maintenance
shall not be made by children unless they are
older than 8 and supervised. Keep the appliance
and its cord out of reach of children aged less than
8 years. Children shall not play with the appliance.
Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the
hazards involved.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.