Kalerm KLM1602 Operation manual - page 19
16
Cleaning and maintenance
Cleaning the water tank
Suggested that, each time adding water, clean the tank
thoroughly with running water first.
Cleaning water tank regularly (about 1 time per month, or
every time when changing the water filter), it would be better
to use wet rag and some mild cleaning fluid.
Because the water tank is made from food-grade and environmental
materials, it might be friable to crack. Please gently pick it up
and put it down, and never let it fall down. If the water tank
damaged, please contact with customer sevice center.
Please remove coffee grounds of the drip
tray and coffee grounds container.
Reinstall the water drip tray to the machine,
it returns to “READY” status.
Reinstall the water drip tray to the machine,
it returns to “READY” status.
If the drip tray is full, the machine will
automatically prompt "EMPTY TRAY". Take
out the water drip tray and pour the waste
water.
Every time when cleaning coffee grounds and waste water in
the drip tray, please clean the drip tray and coffee grounds
container.
After cleaning drip tray, please wipe dry the 2 pieces of
sheetmetals at the end of the drip tray, and then reinstall the
drip tray to the coffee machine.
2
3
INSTALL TRAY
READY
READY
EMPTY TRAY
Cleaning the bean container
Please do not use water to wash the beans container, it would
cause the grinder damaged.
Please use a dry rag or a paper towel to clean the residuary
grease in the bean container.
Because the bean container cover is made from food-grade
and environmental materials, it might be friable to crack.
Please gently pick it up and put it down, and never let it fall
down. If the bean container lid damaged, please contact
with customer sevice center.
Cleaning the coffee machine
Before cleaning the interior of the coffee machine, power it
off, and pull out plug. Never immerse the coffee machine in
water. There will be a risk of electric shock.
Regularly check the coffee machine whether there is excessive
coffee powder precipitate inside the machine. You can use a
brush to remove the coffee precipitate.
Use a dry and soft rag to wipe the touch panel of the machine.
As the touch panel is made of glass, please do not hit it to
avoid the risk of electric shock once the glass broken.
Use a dry and soft rag to wipe the surface of the machine,
and never use hard objects to clean coffee leftover on the
surface, otherwise it would cause the surface damaged.