Kalerm KLM1602 Operation manual - page 18
15
Cleaning and maintenance
Cleaning the coffee grounds container and the drip tray
Do not use chemical solvents and erosive cleaner or alcohol
to clean the coffee grounds container and drip tray.
The drip tray and coffee grounds container cannot be cleaned
in dishwasher.
Do not use metal objects to clean dirt or coffee precipitate to
avoid scraping the drip tray and coffee grounds container.
When prompted to clean the coffee grounds, coffee grounds
must be cleaned up, or it will cause the machine damaged.
Rinse milk unit
After a long time use, residual materials may be left in the milk
unit and need to be cleaned.
When it cumulates to 15 cups, it will
automatically indicate “EMPTY GROUNDS”.
1
EMPTY GROUNDS
Rinse milk unit
Please use steam function to clean the inside milk unit before
disussembling the milk unit.
Take care of burns when using steam function, because hot
steam may spray from steam nozzle.
1. Remove the milk unit carefully
2. Clean every part by water
3. Re-assemble the milk unit and install it to the coffee machine
When the screen shows “READY”, press
setting button to enter into setting.
Select “MAINTENANCE” by pressing the left
and right button, then press the button to
enter it.
Select “RINSE MILKUNIT” by pressing the left
and right button, then press the button to
enter it.
Select “CONFIRM” by pressing the left and
right button, then press the button to enter
clean process.
Remove the milk pipe from the milk box/
container and insert to the hole of the drip
tray grid according to the display on
screen. Press setting button.
Milk unit is under cleaning process.
After cleaning process, the machine enters
into “READY” status.
Select “MENU” by pressing the left and right
button, then press the button to enter it.
READY
MENU
MAINTENANCE
RINSE MILKUNIT
READY
REMOVE MILK PIPE
PRESS SETTING
CLEANING
RINSE MILKUNIT
CONFIRM