Kalerm KLM1602 Operation manual - page 17
14
Press left and right button to choose
“DESCALE”.
Press setting button to confirm.
It will take around 30 minutes. Press setting
to start descaling.
Prearation for descaling and cleaning. First
of all, emply the drip tray, because it would
drain some waste water into drip tray.
Install tray.
Take a bag of decalcifier and sufficiently
dissolves it in clean water then lead this
mixed liquid to the water tank, and reinstall
the water tank to coffee machine.
To start descaling and cleaning for the first
time, put a container, of which the capacity
is more than 1L, under the coffee spout.
Empty tray.
Install tray.
Empty tray.
Install tray.
After the first stage of descaling and
cleaning, take the water tank out and
clean it. Add purified water again, and
reinstall it to the coffee machine.
Press setting button to enter the second
stage of descaling and cleaning.
To clean the residual decalcifierin in pipes .
Put a container, of which the capacity is
more than 1L, under the coffee spout.
When the screen shows “READY”, it indicates
the descaling is completed; Now, you can
continue to make coffee.
DESCALE
DESCALE
CONFIRM
30 MINS
PRESS SETTING
EMPTY TRAY
INSTALL TRAY
SOLVENT IN TANK
PRESS SETTING
DECALCIFYING
INSTALL TRAY
CLEAN WATER TANK
FILL WATER TANK
EMPTY TRAY
2
3
5
1
4
PRESS SETTING
DECALCIFYING
READY
INSTALL TRAY
EMPTY TRAY