Kuschall Advance Service Manual - Service Manual
19
© Küschall AG, Switzerland | 2013-01
Service manual
Side parts
Side parts
Armrest / Siderest
The clothes-guard fitted as standard can be augmented with an armrest.
The armrest may be equipped with both a clothes guard and mudguard.
Fitting an armrest
Difficulty:
Tools:
Ã
3, 5
10
Fold the backrest forwards.
Turn wire ring
Ⓘ and remove the plunger pin Ⓗ and spring Ⓙ .
Remove screw
Ⓕ and screw connections Ⓖ .
Remove the backrest spigots
Ⓑ and replace them with the arm rests Ⓐ
on both sides.
Fit the connecting tube with screws
Ⓒ on both sides.
Attach screw connection
Ⓖ and bolts Ⓕ .
Attach plunging pin with spring and wire ring.
Setting the armrest height
Difficulty:
Tools:
Ã
4
8
3
To adjust the height as required, position the sleeve
Ⓓ in the tube so
that the screw connection
Ⓔ can be fixed to the appropriate hole in the
tube. Place the armrest in the holder.
Set the desired armrest height on both sides.
Fitting and adjusting a height-adjustable siderest
Difficulty:
Tools:
Ã
4, 5 Ò 2 10
Attach the holder
Ⓑ and the clamps Ⓒ using the bolts Ⓐ on both sides
of the seat plate.
Durch Anziehen bzw. Lösen der Schrauben
Ⓓ kann eingestellt werden,
wie leicht sich die Seitenlehne herausziehen bzw. einstecken lässt.
Height-adjustable armrest; set height
Difficulty:
Tools:
Ã
4
Insert the siderest
Ⓔ into the holder Ⓑ.
Loosen
Ⓕ for the height adjustment and slide the armrest into the
desired position.
Retighten the screws
Ⓕ
at the height-fixation
.
D
E
C
A
B
I
J
H
G
F
A
D
E
F
B
C
A
D
Ⓕ
à
4 Nm
Ⓔ
à
7 Nm
Ⓐ à 7 Nm