Kuschall Advance Service Manual - Service Manual
9
© Küschall AG, Switzerland | 2013-01
Service manual
Frame
Checking that the frames are parallel and adjusting
Difficulty:
Tools:
Ã
5 10
The frames must run parallel to one another when the foot bar is mounted
(
Ⓐ = Ⓑ). If this is not the case, the mounted foot bar is either too narrow
or too wide or the frame tubes are misshapen.
Fitting the appropriate foot bar,
Chap. Footrests, Fitting/replacing
footrest and adjusting height
.
or
Replacing misshapen frame(s),
Chap. Frame, Fitting the frames to the
seat plate.
If a carbon footplate is fitted, the interval
Ⓑ can be set.
Checking that the frames are vertical and adjusting
Difficulty:
Tools:
Spirit level,
à 5 10
The frames and/or supporters must be vertical to the ground,
otherwise the wheelchair will not move in a straight line.
Ensuring that the alignment of the supporters is correctly adjusted,
Chap. Castors, Checking and adjusting the alignment of the
supporters.
Place both sides of the spirit level on the surface
Ⓐ of the supporter
and check that it is vertical.
If the supporters are not vertical, loosen the screw connections
between the seat plate and the frame on both sides.
Align the frames with the mounted footrest vertically.
Retighten the bolts on both sides,
Chap. Frame, Fitting the frames to
the seat plate
.
A
B
A