Kuschall Advance Service Manual - Service Manual
8
© Küschall AG, Switzerland | 2013-01
Service manual
Frame
The küschall®-Advance frames are made from aluminium with frame angles of 75°
and 90° In addition there are aluminium frames with adduction. All frames are
available in short, medium and long variants.
Frame
Frame angle 75°
Frame angle
90°
Front wheel
3“
4“
5“
6“
3“
4“
5“
SHv 450
short
short
short
short
short
short
short
SHv 460
short
short
short
short
short
short
short
SHv 470
medium
short
short
short
short
short
short
SHv 480
medium
medium
short
short
medium
short
short
SHv 490
medium
medium
medium
short
medium
medium
short
SHv 500
medium
medium
medium
medium
medium
medium
medium
SHv 510
long
medium
medium
medium
medium
medium
medium
SHv 520
long
long
medium
medium
long
medium
medium
SHv 530
long
long
long
medium
long
long
medium
SHv 540
long
long
long
long
long
long
long
SHv 550
long
long
long
long
long
long
long
Exceptions:
If the frame is 75° and UL > 430: Use medium frames instead of the shorter ones.
If the frame is 75° and UL > 480: Use long frames instead of the medium ones.
If the frame is 90° and UL > 420: Use medium frames instead of the shorter ones.
If the frame is 90° and UL > 470: Use long frames instead of the medium ones.
For lower leg lengths, the high-mounted footrest must be used,
Chap. Footrests, Fitting and adjusting high-mounted footrest.
Mounting frames and seat plates
Difficulty:
Tools:
Ã
5 10
The frame tube can be mounted on three different positions on the seat
plate.
Push the frame tube
Ⓑ into the desired position on the seat plate Ⓒyx.
Tighten the
Ⓐ bolts.
Perform the same setting on both sides.
i
Make sure that there is not conflict between the frame and brakes
or between the front and rear wheels.
Frame
Ⓐ à 7 Nm