Kuschall CHAMPION Service Manual - page 13
13
KÜSCHALL CHAMPION
© Küschall AG, Switzerland | 2013-12
Service Manual
BACKREST
Backrest height (RH)
In order to adjust the backrest height (RH), the backrest tubes have to
be fixed in a different position or they have to be exchanged.
Standard backrest cover, height adjustment
Difficulty:
Tools:
Ã3
8
Push the backrest cover so that bolt and nut on the backrest tube
are revealed.
Remove bolt and nut
.
Adjust the backrest tube
to the required height then insert the
screw
into the closest hole and tighten it again.
Carry out the same setting on both sides.
Reposition the backrest cover correctly.
Tension adjustable back, height adjustment
Difficulty:
Tools:
Ã3
8
Remove the backrest cover
.
Slide the backrest straps either up or down to locate the fixing
bolt
.
Remove bolt and nut
.
Adjust the backrest tube to the required height then insert the
screw
into the closest hole and tighten it again.
Carry out the same setting on both sides.
Reposition the backrest cover.
i
In the case of major changes of the backrest height (RH), bands
may have to be inserted or removed and a larger/smaller backrest
cover may be necessary.
1
2
à7 Nm
1
2
à7 Nm