Kuschall CHAMPION Service Manual - page 4

4

KÜSCHALL CHAMPION

© Küschall AG, Switzerland | 2013-12

Service Manual

GENERAL

Introduction

This service manual is part of the instructions and contains the tech-

nical information for servicing, configuring and repairing a küschall

®

wheelchair. 

WARNING!

Danger of accident and severe injuries.

If the wheelchair is improperly set it can cause 

accidents and severe injuries.

▸ Changes to the wheelchair may only be carried out 

by the dealer.

To guarantee the required safety and reliability, all wheelchairs must 

be comprehensively checked once a year.

In part, assembly and adjustment require extensive experience. For 

this reason, the following assembly instructions have been split into 

three categories:

Requirement

Symbol

Easy – technical understanding required

Intermediate – specialist knowledge required

Difficult – specialist wheelchair assembly knowledge 

and experience required

The required tools and their respective sizes are listed above each 

instruction. The instructions include information on the torques with 

which the respective screw connections must be tightened. Adhering 

to the given torques requires the use of a torque spanner.

Tools

Symbol

Allen key

à2x3, 4, 5, 6

Phillips screwdriver

Ò2

Straddle spanner

19

Socket spanner/ring spanner

 8, 10, 14, 22

Spare parts and adaptations

All spare parts can be purchased from küschall

®

's Customer Services. 

An electronic spare parts catalog is available by logging onto 

www.kueschall.com. Only original spare parts may be used. 

Installing additional adaptations to a küschall

®

 wheelchair requires 

the prior written approval of küschall

®

 AG.

Tightening Allen screws

Allen keys are not designed for greater forces. When tightening or 

loosening an Allen screw, it is therefore advisable to apply force to 

the nut to prevent the hexagon socket from being damaged. 

Tightening and loosening

  Turn the nut with a socket spanner (only use a straddle spanner 

if there is insufficient space) and merely hold the screw tight with 

the Allen key.

ST

SHv

SW

SHh

RH

GL

UL

RW

GB

SB