Kuschall CHAMPION Service Manual - page 17
17
KÜSCHALL CHAMPION
© Küschall AG, Switzerland | 2013-12
Service Manual
FOOTRESTS
Footrest, height adjustment
Difficulty:
Tools:
Ã4
8
Remove on both sides bolt and nut
, which fix the telescopic
tube
to the frame .
Extend the footrest telescope
to the required length, then insert
the bolts
into the closest holes.
Carry out the same setting on both sides.
Tighten the locking bolts
on both sides.
Function control
Check that the footrest is firmly attached but that it can fold easily.
Footplate
Footplate replacement
Difficulty:
Tools:
Ã4
8
Remove the screws
and the screws .
Remove the footplate
and replace it by the new one.
Attach the footplate
with the screws and the screws .
Function control
Check that the footrest is firmly attached but that it can fold easily.
3
1
2
à7 Nm
1
2
3
à7 Nm
à7 Nm
FOOTRESTS
Lower leg length (UL)
To change the lower leg length, the footrest can be fixed at a higher or
lower position,
Chap. Footrests, Footrest, height adjustment.
Short lower leg lengths (UL) can be set using a high-mounted footrest,
Chap. Footrests, Footrest mounted in high position.
Aluminium frame:
UL220 – UL310 high mounted footrest
UL320 – UL390 standard footrest, short frame
UL400 – UL500 standard footrest, long frame
Titan frame:
UL220 – UL340 high mounted footrest
UL360 – UL390 standard footrest, short frame
UL400 – UL500 standard footrest, long frame
Carbon frame:
UL300 – UL340 high mounted footrest
UL400 – UL500 standard footrest