Kuschall CHAMPION Service Manual - page 28
28
KÜSCHALL CHAMPION
© Küschall AG, Switzerland | 2013-12
Service Manual
OPTIONS & ACCESSORIES
Tipper aid
Tipper aid assembly and adjustment
Difficulty:
Tools:
Ã5
Attach the mounting block
onto the folding unit using the 2
bolts
.
Attach the horizontal adaptation support
to the mounting
block
using the 2 bolts .
i
If a cane holder is mounted on the other side of the wheelchair,
then an additional mounting block is needed to lower the tipper
aid to prevent them clashing together when the wheelchair is
folded.
Slide the tipper aid
into the horizontal adaptation support and
fasten it with the spring clip
.
Function control:
The tipper aid may not touch the floor if the wheelchair is tipped
backwards.
If the tipper aid touches the floor remove it and change the
position of the spring clip
. This is done by removing the tube
end cap then pushing the spring clip
one hole further into the
tube using a screwdriver.
Transit wheels
Transit wheels assembly and adjustment
Difficulty:
Tools:
Ã4
10
Attach the vertical adaptation support
to the chair with the 4
bolts
.
Place the transit wheel
against the vertical adapter support
and attach it with the 2 bolts
.
Adjust transit wheels
to the correct height with the spring
clip
.
3
4
1
5
2
6
à7 Nm
à7 Nm
1
2
3
4
1
5
à7 Nm
à7 Nm