Labgear HDSR 260 Setup Manual - 6 Se
Customer Careline: 08457 573 479 (Local rate - UK Only) Technical Support: www.philex.com/support
10
5 Basic Operation - 6 Dish Setup
5.5 Channel Search
Press the MENU key and select [Channel Search].
This Menu gives you the option of Dish Setup or
Data Base Management.
Use the / keys to select an option and press the
/ keys to adjust the setting. Press the Exit key
to exit the Menu.
5.6 DB Management
You can manage the channel data here.
Options are:
Load from USB: Load the channel list to the combo
box from a USB device.
Backup to USB: To copy the channel list from the
combo box to a USB device to pre-install.
6 Se
6 Searching for Channels
If you have a fixed satellite dish with a single LNB
you can scan for channels straight away.
For systems with motorised dishes or multiple LNBs
follow the Dish Setup instructions in sections 7 and
8 before scanning for channels.
To scan for channels from selected satellites, press
the blue key the screen to the right will appear
which allows you to set your search criteria:
6.1 Scan mode
Default: Scans the preset transponders in the
selected satellites.
Blind Scan: Searches for channels in Blind Scan mode.
Network : Scans all the transponders using the
network information from the satellite stream.
6.2 Crypted
FTA Channels: Searches free channels only.
All Channels: Searches all channels, including free
and encrypted.
6.3 Service Type
All: Search all the channels, including radio and TV channels.
DTV: Search TV channels only.
Radio: Search radio channels only.