Labgear HDSR 260 Setup Manual - 13 Timeshift
Customer Careline: 08457 573 479 (Local rate - UK Only) Technical Support: www.philex.com/support
18
13 Timeshift
13.5 Timeshift
Connect a USB device to the receiver, press the PVR
key on the remote control, when the receiver enters
recording, press the PLAY key on the remote control,
a bar will appear at the bottom of the screen, time
shift is now on. You can pause, review or forward
the program using the keys on your remote just like
playing a video.
You can also start timeshift by pressing the pause
key when watching a program, the receiver will
enter timeshift (start recording) and pause the
program showing on screen.
If you want to remove the bar and the recording
time from the bottom of the screen while remaining
in timeshift mode, press the EXIT key on the remote.
Press the Information key to bring them back on
screen. To exit timeshift, press the Stop key on the
remote control.