Lantech LGS-2424C User manual - Chapter 5
Manual is about: 24 10/100/1000T with 4 1000SFP shared
cage SNMP Managed Switch
of
80
19
Chapter 5
Console Management
5.1 Connecting to the Console Port
Use the supplied RS-232 cable to connect a terminal or PC to the console port. The
connected terminal or PC must support the terminal emulation program.
Connecting the switch to a terminal via RS-232 cable
5.2 Login in the Console Interface
When the connection between Switch and PC is ready, turn on the PC and run a terminal
emulation program or Hyper Terminal and configure its communication parameters to
match the following default characteristics of the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None