Lantech LGS-2424C User manual - page 37
37
Click Refresh to get the newest configuration information. Also, the RSTP Bridge
Overview will display as below.
RSTP Bridge Overview
Bridge ID:
Displays the ID produced by the algorithm of MAC address and priority
that is used in the STP/RSTP structure.
Hello Time:
Displays the period of time in seconds that how often the switch
broadcasts hello messages to other switches.
Max Age:
Displays the number of seconds which determines the amount of time
that protocol information received on a port stored by the switch.
Fwd Delay:
Displays the number of seconds which determines how long each of the
listening and learning states will last before the port begins forwarding.
Topology:
Displays the status of the topology.
Root ID:
Displays the ID of the root.
RSTP Port Status
Port/Group:
Displays the port number and its group number.
Path Cost:
The cost of the path to the other bridge from this transmitting bridge at
the specified port.
Edge port:
The port directly connected to end stations cannot create bridging loop
in the network.
P2P Port:
Some of the rapid state transactions that are possible within RSTP are
dependent upon whether the port concerned can only be connected to one other
bridge exactly (i.e. it is served by a point-to-point LAN segment), or can be
connected to two or more bridges (i.e. it is served by a shared medium LAN
segment). This function allows the P2P status of the link to be manipulated
administratively. True means P2P enabled. False means P2P disabled.
Protocol:
Displays the protocol being used.
Port State:
Displays whether the port is the STP mathematic calculation or not.
Click
Apply
to have the setting taken effect.