Lantech LGS-2424C User manual - page 41
41
6.14.1 QoS DSCP Mapping
Change to Qos DSCP Mapping tab:
DSCP [0- 63]:
The system provides 0~63 TOS priority level. When the IP
packet is received, the system will check the TOS level value in the IP packet
that has received. For example, user set the TOS level 25 is high. The port 1 is
following the TOS priority policy. When the packet received by port 1, the
system will check the TOS value of the received IP packet. If the TOS value of
received IP packet is 25 (priority = high), and then the packet priority will have
highest priority.
Priority:
Select the priority level
—high, medium, low, or normal.
And then, click Apply to apply the configuration.
Or, Click Refesh to reset the configuration before applying.
QoS DSCP Mapping interface