Lantech LGS-2424C User manual - page 50
Manual is about: 24 10/100/1000T with 4 1000SFP shared
cage SNMP Managed Switch
of
80
50
802.1X Configuration interface
6.18.1 802.1X Parameters
Click on the tab of 802.1X Parameters to change to configure the 802.1X Parameters
page.
Reauthentication Enable:
Enable the re-authentication mode.
Reauthentication Period (1~3600 seconds):
Set the period of time after which
clients connected must be re-authenticated.
EPA Timeout (1~255 seconds):
Set the period of time the switch waits for a
supplicant response to an EAP request.