Lantech LGS-2424C User manual - 802.1X Commands
76
DHCP (default: Show DHCP
mode).
tftp
[enable|disable]
Activate or deactivate the TFTP
protocol.
[enable|disable]: Enable/disable
TFTP (default: Show TFTP mode).
ip>
tftp enable
tftpget
server-ip
filename
Fetch file from server-ip via the
TFTP protocol and store in flash.
The content of the file will
determine if it is a runtime image
or a configuration file.
server-ip: IP address of
TFTP-server
filename: Name of source file on
TFTP-server
ip>
tftpget 192.168.16.66 3.wrp
tftpput
config|image|backup
server-ip filename
Send configuration, image or
backup file to server-ip via the
TFTP protocol.
config|image|backup: File contains
configuration, runtime image or
backup image server-ip: IP
address of TFTP-server filename:
Name of destination file on
TFTP-server
ip>
tftpput config
192.168.16.66 3.wrp
or
ip>
tftpput image
192.168.16.66 3.wrp
or
ip>
tftpput backup
192.168.16.66 3.wrp
802.1x Commands
Commands
Description
Example
configuration
Show current 802.1X
configuration.
dot1x>
configuration