Lantech LGS-2424C User manual - Ip Commands
75
IP Commands
Commands
Description
Example
configuration
Show IP configured IP address,
mask, gateway, VLAN ID and
mode.
ip>
configuration
status
Show current IP status.
ip>
status
setup
[
[
[
Setup or show IP configuration.
[
(default: Show IP configuration)
[
(default: Subnet mask for address
class).
[
(default: 0.0.0.0).
[
1).
ip>
setup 192.168.16.3
255.255.255.0 192.168.16.10 1
mode
[enable|disable]
Activate or deactivate the IP
configuration.
[enable|disable]: Enable/disable IP
(default: Show IP mode).
ip>
mode enable
ping
[-n
Ping the specified IP address.
[-n
requests to send (default: 1).
[-w
seconds to wait for each reply
(default: 2).
ip>
ping 192.168.16.77
arp
Show the content of the ARP table. ip>
arp
dhcp
[enable|disable]
Activate or deactivate the DHCP
protocol.
[enable|disable]: Enable/disable
ip>
dhcp enable