Lantech LGS-2424C User manual - page 49
49
unauthorized access to the network at the data link layer.
Mode:
Disable or enable IEEE 802.1x authentication.
RADIUS IP:
Assign the Radius Server IP address.
RADIUS UDP Port:
Assign the UDP destination port for authentication requests to
the specified Radius Server.
RADIUS Secret:
Assign an encryption key for using during authentication sessions
with the specified radius server. This key must match the encryption key used on the
Radius Server.
Admin State:
Select the state of the port.
Force Authorized:
The specified port is required to be held in the authorized
state.
Force Unauthorized:
The specified port is required to be held in the
unauthorized state
Auto:
The specified port is set to the authorized or unauthorized state in
accordance with the outcome of an authentication exchange between the
Supplicant and the authentication server.
Re-authenticate:
Restart authentication process for the port.
Force Reinitialize:
Restart a complete authentication process for the port.
Statistics:
Click to view each port statistic.
Re-authenticate All:
Restart a complete authentication process for all of the ports.
Force Reinitialize All:
Restart authentication process for all of the ports.
And then, click Apply to apply the configuration.
Or, click Refresh to reset the configuration before applying.