Lantech LGS-2424C User manual - page 36
Manual is about: 24 10/100/1000T with 4 1000SFP shared
cage SNMP Managed Switch
of
80
36
6.12.2 RSTP Port Configuration
Protocol Enable:
Enable or disable the RSTP protocol for the port.
Edge:
Having set the port as an edge port which directly connected to end stations
cannot create bridging loop in the network. To configure the port as an edge port,
tick the check box.
Path Cost:
The cost of the path to the other bridge from this transmitting bridge at
the specified port. Enter a number from 1 through 200,000,000.
And then, click Apply to apply the configuration.
Or, click Refresh to reset the configuration before applying.
RSTP Port Configuration interface
6.12.3 RSTP Status Tab