Lantronix Device Server MSS 485 Installation Manual - 3.5.2 Spx
Getting Started
Logout
3 - 7
3.5.2 SPX
For SPX connections, the MSS and the target device must advertise
themselves via SAP announcements. To view all available SPX devices
(those advertising themselves) type Show Nodes SPX at the Local
prompt. Then type “SPX” followed by the target device’s SAP name.
Figure 3-7:
SPX Connection
3.5.3 LAT
To connect to a LAT service, type the word “LAT” followed by the name
of the desired host or service. To view available LAT nodes and services,
enter Show Nodes LAT or Show Services at the Local prompt. The
example below shows how to connect to the highest-rated service named
“modem” on the network.
Figure 3-8:
LAT Service Connection
3.6 Logout
To manually log out of the MSS, type “Logout” at the Local prompt or
press Ctrl-D.
Local> SPX
sap_name
Local> LAT “modem”