Lantronix Device Server MSS 485 Installation Manual - C - Pinouts
of
69
Pinouts
Console DB9 Connector
C - 1
C - Pinouts
In the following diagrams, unlabeled pins are not connected.
C.1 Console DB9 Connector
The figure below shows the pin connections of the MSS DB9 connector.
Figure C-1:
Pinout of DB9 Console Port
C.2 RS-485 Connectors
The RJ45 and Screw Terminal Block RS-485 connectors are wired in
parallel. Only one of these ports can be used at a time.
C.2.1 RS-485 RJ45 Connector
The figure below shows the pin connections of the RS-485 RJ45 connector
only.
Figure C-2:
Pinout of RS-485 RJ45 Connector
RX TX Shield
1
5
9
6
2 - Shield
3 - TXA
4 - TXB
5 - RXB
7 - Shield
6 - RXA
1
8