Lantronix Device Server MSS 485 Installation Manual - page 33
of
69
Serial Port Configuration
Configuration
4 - 6
A dedicated service is configured the same way as a preferred service.
No dedicated service is configured for the MSS by default.
Ex:
CHANGE DEDICATED LAT:LN=vax8:LD=0005
•
Autostart
: Normally, the serial port will wait for a carriage return
before starting a connection. When the Autostart option is enabled,
the connection will be established as soon as the unit boots.
A port set for Autostart will not be idle, and therefore will not be
available for network connections. If network connections are desired,
Autostart should remain disabled (the default).
Ex:
CHANGE AUTOSTART ENABLED