Lantronix Device Server MSS 485 Installation Manual - 1.2 Terms
Terms
Introduction
1 - 4
1.2 Terms
In this manual, the following terms are used to describe parts of a network.
Host
A computer attached to the network. The term
host is generally used to denote interactive
computers, or computers that people can log into.
Node
Any intelligent device directly connected to the
Ethernet network such as a host, a printer, or a
terminal server. All nodes have their own Ethernet
addresses. The MSS is a node. Devices connected
to the MSS are not nodes.
Master
The device that controlls all other devices on an
RS-485 network. An RS-485 network typically has
one master device.
Slave
Any device on the RS-485 network that is not the
master. An RS-485 network can have up to 31 slave
devices.
Session
A logical connection to a service. A typical session
is a terminal connected to a host through the
server.
Local mode
The MSS user interface. It is used to issue
configuration and session management
commands and to establish connections. When in
Local mode, users will see a
Local>
prompt.