Lantronix Device Server MSS 485 Installation Manual - page 43

Interactive Connections

Using the MSS

5 - 10

5.2.3.2 Show IPsecurity

This command shows the current TCP/IP security table, if one exists. 

Addresses or ranges of addresses are listed according to the kind of 

restrictions placed upon them.

5.2.3.3 Show NetWare

All necessary information related to IPX/SPX connections can be viewed 

including the name of the NetWare loadserver and the number of frames 

transmitted. Specifically, a user can find out which frame types are 

enabled, if internal routing is enabled, and what internal network 

number governs internal routing.

5.2.3.4 Show Node LAT/SPX

This command shows the LAT or SPX nodes that the MSS can see. For 

LAT, the name of each service node is listed along with its identification 

string and availability. For SPX, node information includes each node’s 

socket number, hop count, frame type, and status.

5.2.3.5 Show Ports

This command displays the configuration and connection status of the 

serial port. Settings such as flow control, baud rate, parity, and default 

hosts are shown. In addition, users can view the port access type and 

login status. Errors are summarized, although in less detail than those 

shown by the Show Server Counters command.

5.2.3.6 Show Server Bootparams

This command displays MSS identification and boot procedure 

information. The first lines display the MSS version, hardware address, 

network name and node number, identification string, and how long the 

MSS has been running. Software and ROM versions, configured 

loadhosts, and startup files are also displayed.

5.2.3.7 Show Server Characteristics

This command displays network-related server identification 

information including the MSS’s hardware address, node address, IP 

address, domain, any configured gateways and nameservers, and the 

subnet mask. In addition, inactivity and retransmission limits, password 

restrictions, and the types of incoming logins permitted are shown.