Summary of P5100 Series

  • Page 1

    Security policy mm101880v1 r1a jaguar ™ 700p.

  • Page 2

    Mm101880v1 r1a 2 notice! This manual covers m/a-com private radio systems, inc., products manufactured and sold by m/a-com private radio systems, inc. Notice! The software contained in this device is copyrighted by m/a-com private radio systems, inc. Unpublished rights are reserved under the copyrig...

  • Page 3

    Mm101880v1 r1a 3 table of contents page 1. Introduction ....................................................................................................................4 1.1 product description .........................................................................................4 1.2 fips ta...

  • Page 4: 1. Introduction

    Mm101880v1 r1a 4 1. Introduction the purpose of this document is to provide a point of reference for operators to describe the jaguar™ 700p radio’s capabilities, protection, and access rights. This document was developed to meet the fips 140-1 cryptographic module standard requirements. 1.1 product ...

  • Page 5: 2. Roles

    Mm101880v1 r1a 5 2. Roles the m/a com jaguar 700p radio supports two roles; a crypto-officer and user role. Since the module is only a level 1 device, no authentication of either operator is necessary or provided by the radio. Each operator only requires physical access to the radio to perform the n...

  • Page 6

    Mm101880v1 r1a 6 4.3 status/message this feature delivers short data messages on the control channel with the press of a single button. 4.4 proscan™ proscan is an advanced algorithm for operation on wide area networks. 4.5 priority system scan this feature sets the priority system in proscan operati...

  • Page 7: 5. Control

    Mm101880v1 r1a 7 4.13 indicators and display messages the radio display is made up of 3 lines. Lines 1 and 2 contain eight alphanumeric character blocks and are used primarily to display system and group names. Line 1 also displays radio status messages. Line 3 is used primarily to display radio sta...

  • Page 8

    Mm101880v1 r1a 8 5.2 front panel – scan model figure 2 – front panel of scan model key function !" primary function: allows user to select either system, groups, or channels, depending on personality initialization. The buttons act as step up or step down. Pressing one of these buttons displays the ...

  • Page 9: 1-9, *, 0, #

    Mm101880v1 r1a 9 5.3 front panel – system model figure 3 – front panel of system model key function '" same as scan model # same as scan model 1-9, *, 0, # these keys are used to place telephone interconnect and individual (unit-to-unit) calls. The keys operate like a normal telephone keypad. ( used...

  • Page 10

    Mm101880v1 r1a 10 5.4 side controls the following are the controls located on the side of the system and scan models. Option button clear/monitor/ option button ptt button figure 4 – side view of jaguar 700p 5.4.1 ptt button the weather-sealed push-to-talk (ptt) button must be pressed before voice t...

  • Page 11: 6. Key

    Mm101880v1 r1a 11 6. Key management the m/a com jaguar 700p radio has a very simple key management plan. The radio only stores one type of cryptographic key (des). The des keys stored by the radio are used for the protection of data transmitted when the radio is in private mode. The des keys stored ...

  • Page 12

    Mm101880v1 r1a 12 appendix a – radio status icons status icons are indicators that show the various operating characteristics of the radio. The icons show operating modes and conditions and appear on the third line of the display as follows. On - indicates the radio is transmitting. In trunked mode:...

  • Page 13: Appendix B – Messages

    Mm101880v1 r1a 13 appendix b – messages during radio operation, various radio status messages can be displayed. The messages are described below. Message name description queued call queued trunked mode only. Indicates the system has placed the call in a request queue. Sys busy system busy trunked m...

  • Page 14

    Mm101880v1 r1a 14 appendix c – error messages if either of the following error messages are displayed, the radio was either initialized incorrectly or needs servicing: dsp err err=xxxx dsp err or dig v err (power up only) appendix d – option and accessories the jaguar 700p has the following accessor...

  • Page 15

    Mm101880v1 r1a 15 this page intentionally left blank.

  • Page 16

    M/a-com wireless systems 3315 old forest road lynchburg, virginia 24501 (outside usa, 434-385-2400) toll free 800-528-7711 www.Macom-wireless.Com printed in u.S.A..