Mackie TT24 Owner's Manual - 2.1
Mackie TT24 Digital Live Console Owner’s Manual
13
Chapter 2: Quickstart Tutorial
This Quickstart Tutorial will help you begin using the TT24 quickly and easily
by providing step-by-step instructions for its most commonly utilized tasks.
Rest assured that our team of design engineers has verified these instructions!
It may be helpful to refer to Appendix B:
Configurations and Block Diagrams
to see how several useful complete systems are interconnected.
2.1
Connect Amplifier/Speakers
1. Plug in a pair of amps/speakers into the MAINS OUT LEFT and RIGHT
XLR connectors (Figure 2-1).
2. Connect an amp/speaker to AUX SEND 1.
3. Plug in headphones.
Figure 2-1 Mains and Aux Sends Outputs
2.2
Connect a Mic
This section describes how to connect a mic to channel 1, set the gain, route to
groups/auxes, and engage/adjust the variable high-pass filter.
Connect mic to channel 1
1. Plug a mic into channel 1’s XLR input (top-right of rear panel).
2. Press the ANLG bank select button (right of Figure 2-2).
3. Set the LINE switch to the up (mic) position.
CD/TAPE A
TALKBACK
OUT
IN
CTR/MONO
RIGHT
LEFT
MONITOR
MAINS OUT
LINE INPUTS
AUX SENDS
1
2
3
4
5
6
7
8
9
10
11
12
L
R
C
12 Aux
Sends
CD/Tape B
Inputs
CD/Tape A
Inputs/Outputs
Main Outputs
R
M
L
1
2
3
4
5
6
7
8
R
L