Mackie TT24 Owner's Manual - 5.5
Mackie TT24 Digital Live Console Owner’s Manual DSP and Internal Effect Allocation
57
Compressor
The Group’s compressor operates identically to the channel’s (see
Compressor
on page 53).
The Group mode setting determines the number of Compressor sections and
DSP units required: Mono = 1, Stereo = 2, LCR = 3. Stereo and LCR groups
have linked Compressor sections to implement their multichannel format. The
Group Compressor applies to all group channels.
The Group Compressor can be viewed from the Group OVERVIEW Touch-
screen and adjusted from the COMPRESSOR Touchscreen.
5.5
Matrix Output
Each Matrix output has an adjustable delay.
5.5.1
Delay
Each Matrix output has a 600 ms delay to allow time alignment of multiple
speaker groups in a large venue (see
Delay
on page 89).
5.6
Internal Effects Processors
The internal EFX have four independent mono input/stereo output effects pro-
cessors that are adjusted from the EFX Touchscreens, accessed by pressing the
EFX button or from their associated returns OVERVIEW Touchscreens. Each
processor can utilize one of the following effects: Reverb, Mono Delay, Stereo
Delay, Ping Pong Delay, Chorus, or Flange. Each effect has a post-effect EQ
with high- and low-shelf filter, and one parametric mid-band filter.
The internal effects can be fed from any of the Aux Sends or the Matrix Out-
puts. By default, the four effects processors are fed by Aux Sends 9–12. Routing
is accomplished on the EFX Touchscreen (see
Effects
on page 90).